aqui está a screen
o teu problema não deve ser do router, ele tem a ligação a praticamente 1Mbps de Download e 384Kbps de upload, logo só deves ter um upload de 60Kbps e já é bom!
A tua margem de SNR está um bom bocado baixa logo deves ter falhas na ligação etc, quanto mais alta melhor.
A tua margem de atenuação está muito boa, quanto mais baixa melhor.
Não compreendo uma cena, é que tu com essa atenuação estás mais ou menos a 1,5Km da central e tu disseste que estavas mesmo no limite é estranho teres uma atenuação tão boa.
experimenta mudares a modulação para ADSL2 ou ADSL2+ ver se fica melhor.
senão tens de fazer alguns testes com o modem original e ver se o dados são muito diferentes.
já agora uma explicação do sinal ruido e atenuação:
"SNR - Higher numbers are better than lower numbers.
Line Attenuation - Lower numbers are better than higher numbers.
Noise Margin (AKA Signal to Noise Margin or Signal to Noise Ratio)
Relative strength of the DSL signal to Noise ratio. The higher the number the better for this measurement. In some instances interleaving can help raise the noise margin to an acceptable level.
6dB or below is bad and will experience no synch or intermittent synch problems
7dB-10dB is fair but does not leave much room for variances in conditions
11dB-20dB is good with little or no synch problems
20dB-28dB is excellent
29dB or above is outstanding
Line Attenuation
Measure of how much the signal has degraded between the DSLAM and the modem. This is largely a function of the distance from the exchange. The lower the dB the better for this measurement.
20dB and below is outstanding
20dB-30dB is excellent
30dB-40dB is very good
40dB-50dB is good
50dB-60dB is poor and may experience connectivity issues
60dB or above is bad and will experience connectivity issues"