Asus P5K-E/WiFi-AP Bios, O.C Ajuda & Tempsº ?
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 400
PCI-E Frequency: 100 * (Ou meteria a 102?)
DRAM Command Rate: AUTO * (Não percebo 2 opções lá (1T/2T) sem que em AUTO fica me nos 2T)
DRAM Frequency: 800Mhz is 1:1 * (os 1066 em CL4 aconcelharam me), mas com 1066MhzMhz /ou 1333Mhz diz me O.C Failed! 1:1 tá bom ou meteria a 2:3?
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 14
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: AUTO
TRTP: AUTO
DRAM Static Read Control: Disabled
Transaction Booster: AUTO
Clock Over-Charging Mode: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: 1.45v
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: AUTO * (Tenho em AUTO as opções eram: 1.50v/1.60v/1.70v/1.80v) * acocelham lowest settings
DRAM Voltage: 2.2v
FSB Termination Voltage: AUTO * (Tenho em AUTO as opções eram: 1.20v/1.30v/1.40v/1.50v) * acocelham lowest settings
North Bridge Voltage: AUTO * acocelham lowest settings
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled
Do not leave any of the voltages on auto because on P35 they will automatically raise with the fsb. The only things that should be left on auto I marked above.
É A MINHA CONFIG NA BIOS
Do que tenho a vermelho é duvidas ,mas se virem que tá algo mal do resto das opções que poderei modificar agradeço
Para não ocupar mais espaço aqui meto so o link do O.C pelo Everest
http://img90.imageshack.us/my.php?image=oceverestgf2.jpg
Sistema:
Motherboard:
ASUS P5K-E WIFI-AP CHIPSET P35 SOCKET 775
Processador:
CORE 2 QUAD Q6600/G0 2.4GHZ FSB1066 8MB CACHE OEM
Memória:
Corsair 2x1Gb xms2 Dominator 1066Mhz PC8500 C5D 5-5-5-15 DDR2
Placa Gráfica:
EVGA 8800GTS Ko ACS3 320MB DDR3 HDTV PCIe -N817
O Thermalright Ultra 120mm Extreme Edition não me cabia na caixa
devido as dimensões da caixa recomendaram me este Cooler:
ASUS SILENT KNIGHT II
Versão melhorada do cooler Asus Silent Knight. Totalmente em cobre com 6 heatpipes. O topo de gama da ASUS!
CARACTERISTICAS
Material Cu. Base + Cu. Punched Fins (128 fins) + 6 Heat Pipes
Fan Speed 2,300 rpm ± 10%
CPU Support: Intel® Core™2 Extreme/ Core™2 Quad (Quad-Core) ; Intel® Core™2 Duo/ Pentium® D (Dual-Core) ; Intel® Pentium® 4 HT/ Celeron® D ; AMD Athlon™ 64 X2 ; AM
A temp do processador rondam os 38º a O.C 3.60ghz será devo meter a meter a 3.2Ghz?
É normal tanta temp? lembro me que em standard (Original 2.4 Ghz)tinha 24º.
No windows tenho por volta dos 32º/37º e tou cm ja referi um ASUS SILENT KNIGHT II, e tenho a caixa NTZX Zero que só têm 1 frontal 120mm, 2 traseiras de 120mm, 4 laterais 120mm, e uma no topo a 80mm todas exepto as laterais são da Xsilent pro.
Sera da pasta termica? meti uma camada mt fina da Artic Colling com uma mistura mt peq da asus que vinha no cooler SILENT KNIGHT II.
Fui testar a jogar F.E.A.R 5 minutos e foi me até aos 41º
Bem agradeço breves opniões cumps!
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Frequency: 400
PCI-E Frequency: 100 * (Ou meteria a 102?)
DRAM Command Rate: AUTO * (Não percebo 2 opções lá (1T/2T) sem que em AUTO fica me nos 2T)
DRAM Frequency: 800Mhz is 1:1 * (os 1066 em CL4 aconcelharam me), mas com 1066MhzMhz /ou 1333Mhz diz me O.C Failed! 1:1 tá bom ou meteria a 2:3?
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 14
TWR: AUTO
TRFC: AUTO
TWTR: AUTO
TRRD: AUTO
TRTP: AUTO
DRAM Static Read Control: Disabled
Transaction Booster: AUTO
Clock Over-Charging Mode: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: 1.45v
CPU Voltage Reference: AUTO
CPU Voltage Damper: Enabled
CPU PLL Voltage: AUTO * (Tenho em AUTO as opções eram: 1.50v/1.60v/1.70v/1.80v) * acocelham lowest settings
DRAM Voltage: 2.2v
FSB Termination Voltage: AUTO * (Tenho em AUTO as opções eram: 1.20v/1.30v/1.40v/1.50v) * acocelham lowest settings
North Bridge Voltage: AUTO * acocelham lowest settings
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled
Do not leave any of the voltages on auto because on P35 they will automatically raise with the fsb. The only things that should be left on auto I marked above.
É A MINHA CONFIG NA BIOS
Do que tenho a vermelho é duvidas ,mas se virem que tá algo mal do resto das opções que poderei modificar agradeço
Para não ocupar mais espaço aqui meto so o link do O.C pelo Everest
http://img90.imageshack.us/my.php?image=oceverestgf2.jpg
Sistema:
Motherboard:
ASUS P5K-E WIFI-AP CHIPSET P35 SOCKET 775
Processador:
CORE 2 QUAD Q6600/G0 2.4GHZ FSB1066 8MB CACHE OEM
Memória:
Corsair 2x1Gb xms2 Dominator 1066Mhz PC8500 C5D 5-5-5-15 DDR2
Placa Gráfica:
EVGA 8800GTS Ko ACS3 320MB DDR3 HDTV PCIe -N817
O Thermalright Ultra 120mm Extreme Edition não me cabia na caixa
devido as dimensões da caixa recomendaram me este Cooler:
ASUS SILENT KNIGHT II
Versão melhorada do cooler Asus Silent Knight. Totalmente em cobre com 6 heatpipes. O topo de gama da ASUS!
CARACTERISTICAS
Material Cu. Base + Cu. Punched Fins (128 fins) + 6 Heat Pipes
Fan Speed 2,300 rpm ± 10%
CPU Support: Intel® Core™2 Extreme/ Core™2 Quad (Quad-Core) ; Intel® Core™2 Duo/ Pentium® D (Dual-Core) ; Intel® Pentium® 4 HT/ Celeron® D ; AMD Athlon™ 64 X2 ; AM
A temp do processador rondam os 38º a O.C 3.60ghz será devo meter a meter a 3.2Ghz?
É normal tanta temp? lembro me que em standard (Original 2.4 Ghz)tinha 24º.
No windows tenho por volta dos 32º/37º e tou cm ja referi um ASUS SILENT KNIGHT II, e tenho a caixa NTZX Zero que só têm 1 frontal 120mm, 2 traseiras de 120mm, 4 laterais 120mm, e uma no topo a 80mm todas exepto as laterais são da Xsilent pro.
Sera da pasta termica? meti uma camada mt fina da Artic Colling com uma mistura mt peq da asus que vinha no cooler SILENT KNIGHT II.
Fui testar a jogar F.E.A.R 5 minutos e foi me até aos 41º
Bem agradeço breves opniões cumps!