[Nova Caixa] Antec P180

Nemesis11

Power Member
Normalmente não se fala muito de caixas, mas esta é um pouco diferente. Parece bastante interessante para quem quer menos barulho.

p180qr1cy.jpg


p180binside9dz.jpg


The P180 features include:

- Plastic / aluminum multi-layer panels for high acoustic damping (like Antec Aria)

- Bottom placement of PSU in separate, isolated ducted chamber with 120mm fan option in middle

- Four HDD cage in the bottom ducted chamber in silicone rubber suspension mounts

- Two 120mm fan exhaust vents in top chamber, one on top panel over CPU area

- 120mm intake vent for top chamber in front of two drive bay with same silicone rubber mounts

- Ducting system for VGA/CPU heat to be exhausted out the back panel with up to two additional fans; this is not shown in the pic and also does not have to be used

- 3-position speed switch for each of the 3~4 included quiet fans.

- Front door hinges open 270 degrees to get out of the way

- Front bezel has side vent slots all around for unrestricted airflow even with door closed

- Extensive use of damping materials at panel contact points to reduce resonance / vibration noise

Features:

• Power Supply: resides in lower chamber to isolate heat
and noise from the system
• Innovative three-layer side panel (aluminum, plastic,
aluminum) provides easy access & dampens system
generated noise
• Unique upper and lower chamber structure that allows heat
dissipation and noise reduction
• Cooling System:
- 1 rear (standard) 120mm TriCool Fan with 3-speed switch control
- 1 top (standard) 120mm TriCool Fan
- 1 front (optional) 120mm fan
- 1 lower chamber (standard) 120mm x 38mm (thick) TriCool Fan
- Antec Quiet Computing Chassis Air Duct for better, quiet
cooling of the CPU and graphics card
- 1 (optional) 92mm case fan in the Chassis Air Duct over
the CPU
- 1 (optional) 80mm case fan in the Chassis Air Duct over
the graphics card
• Maximum expandability with 11 Drive Bays
- External 4 x 5.25"; 1 x 3.5"
- Internal 6 x 3.5" for HDD

The new P180 is Antec's top-of-the-line chassis for performance enthusiasts. Antec has taken key portions of the quiet technology from the Sonata and added it to the P180, including the ducted fan, rear case fan and anti-vibration grommets. The power supply is now mounted in the bottom of the chassis, and is thermally isolated from the motherboard chamber, even to the point of having its own independent cooling fan. Side panels and front door are constructed of multilayer plastic and metal, for both cosmetic and sound-deadening reasons. The P180 will be shipping in Q1 of 2005, and will probably cost around $169 (MSRP).

http://www.silentpcreview.com/news452.html
http://www.silentpcreview.com/files/images/p180/P180.pdf
http://forums.silentpcreview.com/viewtopic.php?t=18160
http://www.pcmag.com/article2/0,1759,1748720,00.asp
 
Última edição:
Tem um design muito agradável para o meu gosto. Gosto bastante sem duvida.
Podiam fazer um versão totalmente negra.
Até me dá vontade de trocar a minha actual
 
Madril disse:
Espero é que a qualidade seja melhor k a P160 que tinha uns plasticos mm manhosos para o preço que era ...

Tb fiquei um pouco desiludido quando vi a P160. Se bem me lembro a parte frontal tinha um plastico que não parecia nada sólido.

Quanto a esta, é feita de varias camadas de plastico e aluminio (exterior). Não dizem quantas, mas só isso já deve aumentar a solidez dela.

Gostei muito dos pormenores (suportes dos discos, separação da fonte, etc). Parece estar bem pensava. É esperar por reviews.

EDIT: Acho que ela não é Btx. Não vi Btx em nenhum sitio.
Preço, o ultimo link fala em $169.
 
Excelente, o design minimalista agrada-me muito.
Tb a estrutura parece-me muito boa, a confirmar pelas reviews.
Em especial o facto de podermos tirar as ventoinhas da fonte para diminuir o ruído.
(já estou a ver uma ModStream com uma SX1) :009:

Esta caixa n é BTX :fart: , é uma caixa ATX com a fonte em baixo, mais nada.

O único problema deve ser o preço, para mim traz demasiadas ventoinhas e tb tem demasiadas bainhas.
Mas já foi adicionada a minha lista. :x2:
 
Nova Antec P180 ... e é lindaaaaaaaaa!

que design minimalisa explendoroso! Adorei ...


The P180 features include:

* Plastic / aluminum multi-layer panels for high acoustic damping (like Antec Aria)

* Bottom placement of PSU in separate, isolated ducted chamber with 120mm fan in middle

* Four HDD cage in the bottom ducted chamber in silicone rubber suspension mounts

* Two 120mm fan exhaust vents in top chamber, one on top panel over CPU area

* 120mm intake vent for top chamber in front of two drive bay with same silicone rubber mounts

* Ducting system for VGA/CPU fresh air intake via vents next to the PCI slots on the back panel with up to two additional fans; this is not shown in the pic and also does not have to be used

* 3-position speed switch for each of the 3~4 included quiet fans.

* Front door hinges open 270 degrees to get out of the way

* Front bezel has side vent slots all around for unrestricted airflow even with door closed

* Extensive use of damping materials at panel contact points to reduce resonance / vibration noise


P180_q_rs.jpg


P180_front_opens.jpg


P180_backs.jpg


P180_b_Insides.jpg
 
Epá, a caixa é mesmo bonita. Mas mesmo muito. Só é pena o preço que assusta.
Se ñ tivesse investido o que já investi no meu projecto, acho que ñ pensava duas vezes. Afinal é bem capaz de ficar mais barata.
 
Back
Topo