[Ajuda] Gravador de DVDs

METEMEDO · 2 de Fevereiro de 2008

Boas, pessoal.

Tenho o gravador LG, modelo HL-DT-ST DVDRAM GSA-4082B.

O que se passa é que dá-me sempre erro ao finalizar o DVD!

Actualizei o firmware para a versão A209 (pareceu-me ser a ultima) e continua igual...

Aqui fia também o log:

Código:

1K22-0867-0795-66M4-5403-7728-****
1K22-0867-0795-66M4-5658-4917-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.2.8.0
Internal Version: 8, 2, 8, 0

Recorder:             <HL-DT-ST DVDRAM GSA-4082B>Version: A209 - HA 1 TA 4 - 8.2.8.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <JE8509Q  IUR946B         >Version: 2.0B - HA 1 TA 2 - 8.2.8.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST380011A                        atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : ST3250824A                       atapi Port 0 ID 1  DMA: On 
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4082B        atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : HL-DT-ST CD-RW GCE-8481B         atapi Port 1 ID 1  DMA: On 
CdRomPeripheral      : JE8509Q IUR946B         2.0B   vaxscsi Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8481B   E:   CdRom1
JE8509Q IUR946B            F:   CdRom2
HL-DT-ST DVDRAM GSA-4082B  D:   CdRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 1279MB (1310192kB)
Free physical memory: 854MB (875340kB)
Memory in use       : 33 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

2.2.2008
Burn DVD Image
15:40:09    #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
15:40:10    #2 Text 0 File Burncd.cpp, Line 3502
    Turn on Disc-At-Once, using DVD media
    
15:40:10    #3 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media:  2295103 (510:01.28, 4482MB)
    Last address to be written:            2281695 (507:02.45, 4456MB)
    
15:40:10    #4 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)
    
15:40:10    #5 Text 0 File DlgWaitCD.cpp, Line 2957
    Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD+R
     Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
     Disc Application Code: 0, Extended Information Indicators: 7
    
15:40:10    #6 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
15:40:10    #7 Text 0 File ThreadedTransferInterface.cpp, Line 762
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
        2 indices, index0 (150) not provided
        original disc pos #0 + 2281696 (2281696) = #2281696/507:2.46
        not relocatable, disc pos for caching/writing not required/not required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281696 blocks [D: HL-DT-ST DVDRAM GSA-4082B]
    --------------------------------------------------------------
    
15:40:10    #8 Text 0 File ThreadedTransferInterface.cpp, Line 964
    Prepare [D: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4672913408, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   1 |    0x41 |  2281696 |  2281696 | 0x00
      2281696 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
15:40:10    #9 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
    
15:40:10    #10 Text 0 File Burncd.cpp, Line 4288
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
    
15:40:10    #11 Phase 24 File dlgbrnst.cpp, Line 1767
    Caching of files started
    
15:40:10    #12 Text 0 File Burncd.cpp, Line 4407
    Cache writing successful.
    
15:40:10    #13 Phase 25 File dlgbrnst.cpp, Line 1767
    Caching of files completed
    
15:40:10    #14 Phase 36 File dlgbrnst.cpp, Line 1767
    Burn process started at 4x (5.540 KB/s)
    
15:40:11    #15 Text 0 File ThreadedTransferInterface.cpp, Line 2681
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
    
15:40:11    #16 Text 0 File Cdrdrv.cpp, Line 10140
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
     Book Type: DVD+R (10), Part Version: 1.0x (1)
     Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
     Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
     Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
     Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
     End Physical Sector Number of Data Area:          26053F h
     Data in Burst Cutting Area (BCA) does not exist
      Disc Application Code: 0 / 0 h
      Extended Information indicators: 7 h
      Disc Manufacturer ID: MCC.....
      Media type ID: 004
      Product revision number: 0
      Number of Physical format information bytes in use in ADIP up to byte 63: 56
     Media Specific [16..783]:
        00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38    ...MCC.....004.8
        23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08    #T7..Tl.._......
        01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
        01 00 38 38 02 2C 5A 1A - 05 2E 23 10 04 1E 1D 01    ..88.,Z...#.....
        00 00 02 2C 5A 1A 05 2E - 23 10 04 1E 1D 01 00 00    ...,Z...#.......
        02 00 54 70 02 30 63 3C - 24 14 0C 0C 01 20 00 00    ..Tp.0c<$.......
        00 00 02 40 66 42 24 14 - 0C 0C 01 20 00 00 00 2B    ...@fB$........+
        03 00 54 DF 02 30 63 3C - 24 14 0C 0C 01 20 00 00    ..T..0c<$.......
        00 00 02 75 5E 58 24 14 - 0A 0A 01 20 00 00 00 59    ...u^X$........Y
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    
15:40:11    #17 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: Yes
    
15:40:11    #18 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800
    
16:04:57    #19 Text 0 File WriterStatus.cpp, Line 240
    <D: HL-DT-ST DVDRAM GSA-4082B> start writing Lead-Out at LBA 2281696 (22D0E0h), length 0 blocks
    
16:05:42    #20 SPTI -1194 File SCSIPassThrough.cpp, Line 197
    CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1194)
    CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04 
    
16:05:44    #21 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 2281696
    
16:05:44    #22 CDR -1194 File ThreadedTransferInterface.cpp, Line 1827
    PMA update failure
    D: HL-DT-ST DVDRAM GSA-4082B
    
16:05:44    #23 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1827
    Could not perform end of Disc-at-once
    
16:06:13    #24 SPTI -1194 File SCSIPassThrough.cpp, Line 197
    CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1194)
    CDB Data:   0x00 00 00 00 00 00 00 00 00 00 00 00 
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x04
    Sense Area: 0x71 00 03 00 00 00 00 10 35 20 03 0E 73 04 
    
16:06:13    #25 Phase 127 File dlgbrnst.cpp, Line 1767
    Generating DVD high compatibility borders
    
16:06:13    #26 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 0
    
16:06:13    #27 CDR -1194 File WriterStatus.cpp, Line 287
    PMA update failure
    D: HL-DT-ST DVDRAM GSA-4082B
    
16:06:13    #28 TRANSFER -24 File WriterStatus.cpp, Line 287
    Could not perform end of Disc-at-once
    
16:06:13    #29 Phase 38 File dlgbrnst.cpp, Line 1767
    Burn process failed at 4x (5.540 KB/s)
    
16:06:13    #30 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
16:06:38    #31 Text 0 File Cdrdrv.cpp, Line 11391
    DriveLocker: UnLockVolume completed
    
16:06:38    #32 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Malcom115 · 3 de Fevereiro de 2008

Duas vezes apareceram-me cá em casa pc's assim. Em ambos os casos o problema era a gravar dvd's.

Não demorou muito a descobrir o problema. Perguntei se o pc tinha overclock e em ambos os casos tinha. Bastou reduzir um bocadinho e já gravavam perfeitamente. Ambos os donos disseram que nao tinham alterado os settings recentemente, mas o material é mesmo assim, se der para começar a dar problemas, não precisa de ser mexido.

Lembro-me tambem de um amigo ter resolvido o problema a outra pessoa, esta que não tinha overclock no pc, reinstalando o respectivo software de gravação que neste caso era o Nero.

METEMEDO · 3 de Fevereiro de 2008

Yah, eu já tinha reinstalado o Nero e este PC não tem overclock...
Não sei mesmo do que será!

Cumps.

Malcom115 · 3 de Fevereiro de 2008

Exprimenta a drive noutro computador. Tens de tirar a limpo se a drive está mesmo ok. Pode ser apenas muito azar junto.

METEMEDO · 6 de Fevereiro de 2008

Yah, mas não tenho aqui outro PC...

Tenho que ver isso.

Cumps.

[Ajuda] Gravador de DVDs

METEMEDO

Power Member

Malcom115

Portugal@Home Member

METEMEDO

Power Member

Malcom115

Portugal@Home Member

METEMEDO

Power Member