Hi, is it normal now during summer my pc temperature: CPU 39/40º Inside: 36/38º ?
Since I have a Artic Cooler for CPU (AMD Athlon Venice Socket 939 3200+) Alpine 64, 92mm Akasa back case fan, two Thermaltake 80 mm fans on the chassis sides, one 92 Noiseblocker in the front, no rotation control (cause it´s making a lot of noise for my home studio with mics). The case is a Chieftec (not very large, taller instead) The board is a DFI Lan Party Nforce 3 (agp) and due to the arquitechture of the board, my Geforce 6600 Heat Pipe is very close to the enormous Alpine CPU Coller...!!! You can´t put a finger between them!!! Is it okay?
One other question: How should I install the fans to make the air flow correct? With the brand faced for inside the case or for the outside?
(Two Seagates 80 Hardrives, 1.5 gb Kingstom) I tryied the Spire Sound Pads for sound absorption but it dind´t do much, only raised the temperature!
I have air conditioning in my room, but being on or off it doesn´t affect the PC temperature at all... and even with just the CPU cooler and one single fan, the temperature is always the same...!!! Less noise
My power supply came with the case: MADE FOR CHIEFTEC 300 Watts, is it enough?
The PC is fast enough, no complains.
How can I cool out the system pipes from my graphic card??
I´m not into overclocking, altough this board was designed for it More for a Powerfull studio working with ProTools among others.
Thanks for your time, best regards
Juca
Since I have a Artic Cooler for CPU (AMD Athlon Venice Socket 939 3200+) Alpine 64, 92mm Akasa back case fan, two Thermaltake 80 mm fans on the chassis sides, one 92 Noiseblocker in the front, no rotation control (cause it´s making a lot of noise for my home studio with mics). The case is a Chieftec (not very large, taller instead) The board is a DFI Lan Party Nforce 3 (agp) and due to the arquitechture of the board, my Geforce 6600 Heat Pipe is very close to the enormous Alpine CPU Coller...!!! You can´t put a finger between them!!! Is it okay?
One other question: How should I install the fans to make the air flow correct? With the brand faced for inside the case or for the outside?
(Two Seagates 80 Hardrives, 1.5 gb Kingstom) I tryied the Spire Sound Pads for sound absorption but it dind´t do much, only raised the temperature!
I have air conditioning in my room, but being on or off it doesn´t affect the PC temperature at all... and even with just the CPU cooler and one single fan, the temperature is always the same...!!! Less noise
My power supply came with the case: MADE FOR CHIEFTEC 300 Watts, is it enough?
The PC is fast enough, no complains.
How can I cool out the system pipes from my graphic card??
I´m not into overclocking, altough this board was designed for it More for a Powerfull studio working with ProTools among others.
Thanks for your time, best regards
Juca